주사기 펌프 SY-09

Name: 주사기 펌프 SY-09
Brand: Nanjing Runze Fluid Control Equipment Co., LTD.

Video of Syringe Pump SY-09

Model Numbers of Syringe Pump SY-09

Small compact size, easy mounting, space-saving, long service life An industrial Syringe Pump with high precision & high performance in micro-liquid transferring self-developed by Runze Fluid. Make step motor move in clockwise or counterclockwise by receiving instructions from the host computer. The circular motion is converted into linear motion by the trapezoidal screw to make the piston move up and down which realizes medical analysis equipment, chromatographic analyzers, food and beverages detection and analysis system, water quality on-line analyzer, petroleum detection equipment and biopharmaceutical extraction devices

Peristaltic Pump SY-09

Specification of Syringe Pump SY-09

Accuracy	≤1%@100% (rated stroke)
Precision (Repeatability)	0.3%-0.7%@100% (rated stroke)
Service life	3 million times no leakage (media: water; 1 rated stroke = one time)
Volume	3ml	8ml
Rated Stroke (control steps)	18mm(3600steps)	19.2mm(3840steps)
Maximum speed	600rpm	300rpm
Linear speed	0.017-10mm/s	0.017-5mm/s
Running time (per rated stroke)	1.8-1080s	3.84-1129s
Resolution	0.005mm/0.833μl	0.005mm/2.083μl
Syringe ID	14.55mm	23.03mm
Actuator	Trapezoidal screw (Lead 1mm)
Wetted Material	Borosilicate glass, PCTFE valve head, PTFE piston
Max. Pressure	Positive: 0-0.8Mpa, Negative:0-0.06Mpa, (retention time based on test)
Channel	Single channel
Connection	1/4-28UNF
Baud rate	RS232/RS485：9600bps / 19200bps / 38400bps / 57600bps / 115200bps CAN：100Kbps/200Kbps/500Kbps/1Mbps
Address & Parameter setting	Via Communication
Max power	15W
Power supply	DC24V/3A
Operating temperature	5℃~55℃
Operating humidity	≤ 80% relative humidity, non-condensing
Dimension (LWH)	5141.5155.2mm	5141.5157.2mm
Net Weight	0.56kg	0.62kg

Function Introduction of Syringe Pump SY-09

Address setting	Address settable via serial port
Baud rate setting	RS232/RS485/CAN baud rate settable
CAN destination address setting	When multiple devices controlled in paralleling, any device can be set with priority address
Speed setting	3ml：from 1 rpm to 600 rpm 8ml：from 1 rpm to 300 rpm (There are difference for gas, liquid and models)
Subdivision setting	subdivision 2-32 are settable
Reset interior data	Factory reset
Parameter query	Query address, speed, subdivision, baud rate, etc.
Version query	Query current firmware version
Motor direction	CW/CCW settable
Reset	Return piston to the origin/home position
Strong stop	Strong stop the running motor
Motor status query	Detect current motor status

Driver Port

Port	Description	Port	Description
+	DC24V Positive	A+/A-	Phase A wiring
-	DC24V Negative	B+/B-	Phase B wiring
TX	RS232 Data Input	IO1	IO1 Optocoupler signal
RX	RS232 Data Output	A	Encoder Phase A
GND	RS232 GND	B	Encoder Phase B
H	CANH	NC	Temporary is not enabled
L	CANL	+5V	Power positive
A	RS485A	GND	GND
B	RS485B	PE	Grounding